Adhesive Anchors

Marshall Sales offers several adhesive anchoring products to meet your project needs. Epoxy adhesives for concrete and brick are ideal for anchoring threaded rod and rebar to an assortment of base materials. Acrylic formulations deliver consistent performance for high-strength anchor grouting even in extreme weather conditions.

Browse our selection of adhesive anchors below.

Epoxy Adhesive

ET-3G™ is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked).

Key Characteristics & Advantages

Handle static and seismic loads: ET-3G™ is suitable for use under static and seismic load conditions in cracked and uncracked concrete and masonry.
Rods: This solution is ideal for use with dowelling and threaded rods.
Size options: ET-3G™ is available in gallon bulk quantities for high-volume applications and can be used with metered dispensing equipment.
Long shelf life: Unopened cartridges stored between 45°F (7°C) and 90°F (32°C) have a two-year shelf life.

High-Strength Epoxy Adhesive

SET-3G™ is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.

Key Characteristics & Advantages

Exceptional performance: SET-3G™ offers superior bond strength, which supports ductile solutions even in high-seismic areas.
Design flexibility: This solution has improved sustained load performance at elevated temperatures.
Jobsite versatility: SET-3G™ can be specified for all base material conditions where in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
Accredited: SET-3G™ is recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.

Acrylic Adhesive

AT-3G is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G dispenses easily and offers a fast-curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code-compliant with the IBC and IRC, AT-3G hybrid adhesive is easy to install with the conventional blow-brush-blow hole cleaning method.

Key Characteristics & Advantages

Extreme applications: Excellent for use in cold weather conditions or applications where fast cure is required.
Accredited: Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions.
No power brushing required: AT-3G™ can be applied with the conventional blow-brush-blow hole cleaning technique using a wire brush.
Cold-resistant: Base material installation temperatures down to 0°F (-18°C).

Adhesive Anchor Accessories

Marshall Sales offers accessories to fit your adhesive anchor needs. We provide:

Click the button below to find more information about Simpson Strong-Tie adhesive anchors.

The Right Tool for the Job

Order your adhesive anchors and all the accessories you need by using our convenient form. Just click the button below.